DN20.40T DRIVER DIAMETRO DE SALIDA: 2″ DIAMETRO DE BOBINA: 4″ 8 OHM NEODIMIO 260W «LAVOCE»
Producto en Camino
S/931.75
Documentos
Ficha Técnica
Hay existencias
Descripción
DN20.40T DRIVER DIAMETRO DE SALIDA: 2″ DIAMETRO DE BOBINA: 4″ 8 OHM NEODIMIO 260W «LAVOCE»
| Especificaciones | |
| Throat Diameter | 50 mm (2 in) |
| Nominal Impedance | 8 ohm |
| Minimum Impedance | 8 ohm |
| Program Power | 260 W Program power is defined as 3 dB greater than AES |
| AES Power Rating | 130 W Iron loaded test for 2h with continuous, band limited pink noise. Rev. 2003. |
| Sensitivity | 108 dB Measured on axis at 2.83V, 1m, driver loaded on horn, range 500 ÷ 20000 Hz. |
| Frequency Range | 500÷20000 Hz |
| Voice Coil Diameter | 100 mm (3.94 in) |
| Magnet Material | NEODYMIUM |
| Coil Material | EDGEWOUND CCA |
| Former Material | KAPTON |
| Diaphragm Geometry | DOME |
| Diaphragm | TITANIUM |
| Surround Material | TITANIUM |
| Magnet OD | 140 mm (5.5 in) |
| Voice Coil Inductance | 0.17 mH |
| Flux Density | 1.9 T |
| Recommended Crossover | 800 Hz High pass filter with slope 12dB/oct. or higher |
| Driver Displacement Volume | 0.7 l (0.025 ft³) |
Valoraciones (0)
Valoraciones
No hay valoraciones aún.