TPL-3000 AMPLIFICADOR DE PODER 3000W «POTTENZA»

SPECIFICATIONS:

Grouting Resistance testing (25A): ≤100mΩ

Rated Power (1KHz, THD + N= 0.1%): 2 x 700W ± 5% 8Ω stereo, 2 x 1000W ± 5% 4Ω stereo/ 2000W ± 5% 8Ω bridge

Crossover:

• Low pass: A 70Hz – 2.45.dB 120Hz – 3.19dB  B 70Hz – 2.55dB 120Hz – 3.28dB
• High pass: A – 3.01dB  B-0.82dB

Frequency Response (1W 8Ω stereo): 20Hz – 20KHz (± 1dB)

Phase Response 1W, 8Ω, 20Hz – 20Hz: ±90°

Crosstalk (20Hz – 20KHz, Rated Power 8Ω): ≥55dB

S/N Ratio (Rated Power 8Ω, A weighted): ≥90dB

Residual Noise: short circuit input: ≤3mV

Totalharmonic distortion: 8Ω 20Hz – 20kHz Rated Power: ≤0.5%

Intermodulation Distortion: ≤0.05%

Slew Rate: ≥15V/μs

Damping Factor (1KHz, 8Ω): ≥100

Input Impedance: Balanced 20KΩ/Unbalanced 10KΩ

Load Impedance: Stereo 8Ω – 4Ω/Bridge: 8Ω

Protection:

• DC protect: DC ± 4.5V /Short circuit protect: Short circuit output terminal, indefinite protection/High temperature protection: 105°C ± 10°C/Output over load protect: 1Ω, 2Ω/ Soft startup protect: Relay connects after switch on for 2 seconds

Sensitivity (8Ω stereo & 1KHz): 1V/(± 10%)

Mode: Stereo/parallel/Bridge

Fan speed regulation: Stepless speed

Cooling system: Front back to front

Bias voltage: 350mV (± 50mV)

Zero potencial: 0V ± 10mV

Filter Capability: 80V/15000μf x 4

Output Circuitry: H + class

Connectors (each channel): Input connectors: XLR + 6.35 Jack output connectors: speakon

LED indicators (∅3mm): Row(white) Protect(Red) Limiter(Red) Signal(Blue)

Power voltage and frequency: 230V(±10%) 50-60Hz

Power switch: Normal switch (6A)

Power cord: 3 x 1.5mm 2 cable

Power BNC plug: American plug

AC Fuse: 15A